Skip to content

STU’S THIS OR THAT

AluminumCladdingEquipmentMetalsNewsPerformanceRoofingSheet Metal BendingStanding SeamTools

Same Job, Two Tools. Which One Stays in the Van?

Stu Hampton is back. You might know him from Stu’s Cool Shit last November, or from teaching at the Roofing and Cladding Academy after decades on roofs on both sides of the Tasman. This time it’s two tools, same job, and Stu picks which one earns its spot in the kit.

Every roofer’s got a tool they grab without thinking, and it does the job. Mostly. This month is about that “mostly”. The coating that gets chewed, the mark that rubs off before you’ve cut it, or a good tool on the wrong job.

“I get why people buy cheap,” says Stu. “But you don’t just pay for a tool once, eh. You pay for it every time it marks a panel, or you’re back up the ladder fixing something.”

Wuko Duo Uber Bender 7200 or FBC Perfect Bender DXL?

Both of these roll a clean edge, and both live on our shelves, so this round isn’t cheap versus good. It’s about picking the right bender for the bend in front of you.

“People ask me which one’s better,” says Stu. “Wrong question, eh. It’s what job you’ve got on. One’s built for long straight runs, the other gets in where the first one can’t.”

The Wuko Duo Uber Bender 7200 is built for long, straight runs. A second pair of angled discs and a handle keep it tracking true without marking the coating, and it bends to 100° to beat spring-back. The FBC Perfect Bender DXL is the one for bending over an existing profile or reaching deep into a panel, with a 45 mm axle gap and a stainless double-guide frame. There’s also a 350 mm version for when you need to reach past the centre of a full sheet width.

“Long straight edge, grab the Wuko. Bending over a profile, the DXL’s your mate,” says Stu. “Either way, you’re not going back to fix it.”

Stubai Aluminium Pliers or Steel Seamers?

Steel seaming pliers have been in roofers’ pouches forever, and for good reason. Stubai’s aluminium range does the same folds, just lighter.

“Steel’s the old faithful, tough as anything,” says Stu. “But after a full day of folding you feel every bit of it in your forearm. Pick up the aluminium ones, and you notice the difference straight away.”

Stubai’s aluminium seaming pliers are lighter in the hand, with a solid lap joint that keeps the jaws closing true, fold after fold. The range covers straight and 45° seamers for everyday folding, plus the new 80 mm pig ear pliers for corner folds on high standing seams, with slightly rounded edges that go easy on coated sheet and a smooth ball-bearing joint.

“Crisp corner, no marks, and they still feel the same five years down the track,” says Stu. “Simple as.”

Stubai Narrow Foot Pliers or Combination Pliers?

Most roofers have a pair of combination pliers rattling round the ute, and they get grabbed for all sorts. Gutter front tags included.

“Combination pliers are great for wire, not for paint,” says Stu. “Those teeth bite into the coating the second you squeeze, and you don’t get a clean bend on the tag either.”

The Stubai Narrow Foot Pliers are built for exactly this. The narrow build and short nose get right in on a front tag, and with all the force on a small bending surface, they’re far stronger than their 180 mm size suggests. Forged C45 carbon steel and an induction-hardened nose keep the jaw in shape for years.

“Little tool for a little job,” says Stu. “You bend that tag once and you’re done.”

Malco Scriber & Marking Plates or a Screwdriver?

Plenty of roofers mark out with a chisel, a screwdriver tip or a tape and pencil. It works fine until you need the same offset twenty times in a row.

“A good scriber adds layers of quality to your marks that no other tool comes close to,” says Stu. “Fine, sharp line, exactly where you want it, an adjustable head, and strong enough durability to where it won’t bend mid-scribe, ruining the line.”

The Malco Carbide Tipped Scriber’s solid carbide point scribes a fine, clean line and holds its edge far longer than steel, with a replaceable, adjustable tip and a pocket clip. Pair it with one of our new large marking plates, and the tape stays in the pouch. Their clear 5 mm graduations let you scribe the same offset off the same edge every time, and some plates mark circles and hemming returns too.

“Mark it on the offcut side, mark it once, and every piece comes out the same,” says Stu. “Cheapest bit of accuracy you’ll ever buy.”

Buy It Right, Buy It Once

Four rounds, same lesson. The wrong tool rarely lets you down on day one. It lets you down a bit at a time, until you’re spending more time fixing work than doing it.

“A good tool won’t make you a good roofer,” says Stu. “But it’ll stop you stuffing up your own good work. Buy the right one, look after it, and it’ll still be in the ute long after the cheap one’s gone in the skip.”

That’s what we stock at Fribesco. Tools built for daily use that keep doing the job for years, which means less waste and fewer callbacks.

Follow Stu’s roofing escapades on Instagram @ezi_build_services or TikTok @hampster.ezi.build, or come and learn from him at the Roofing and Cladding Academy.

Ready to put your own kit to the test?

Get in touch with the Fribesco team for advice on the right tool for the job.

ROOFING AND CLADDING ACADEMY
Enquire Now
Online shop NZ
Online shop Australia
Return to Blog page

Latest articles

Disccussion

Comments (0)

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top
Contact Us